Plastic Valve
Plastic valves are made from plastic materials and are used in applications that require corrosion resistance and/or chemical handling.
Metal Seated Ball Valve
Metal seated floating ball valve with bidirectional shutoff designed to be used in fugitive emission environments and severe services such as high temperature and abrasive fluids.
Ceramic Valve
Wear-resistant ceramic valves made of special ceramic materials are mainly used in electric power, petroleum, chemical industry, metallurgy, mining, sewage treatment and other industrial fields, especially in the face of high wear, strong corrosion, high temperature, high pressure and other harsh working conditions.
Ventilation Butterfly Valve
A ventilation butterfly valve is a specialized type of flow control device, designed with a disc mounted on a rotating shaft. When the valve is fully opened, the disc rotates to a position parallel to the direction of the flow, allowing air or gas to pass through unimpeded.
Fluorine lined/ Rubber Lined Valve and Filter
Lined valves have a liner throughout the body and trim eliminating harsh chemicals coming in contact with any metal surfaces. Fully-lined valves are commonly available in ball, butterfly, and plug designs.
Bellows Valve
It is specifically designed to maintain a pressure seal within the relative motion caused by opening and closing the valve. This seal is also a safety device that prevents deadly or flammable gases from escaping into the atmosphere and provides an economical way to deter product loss.
Three Way Valve/ Four Way Valve
A 3-way valve allows fluid flow to an actuator in one position and exhausts the fluid from it in the other position. Some 3-way valves have a third position that blocks flow at all ports. A double-acting actuator requires a 4-way valve. A 4-way valve pressurizes and exhausts two ports interdependently.
Eccentric Semi Ball Valve/ C-Ball Valve
A double eccentric C-ball valve is similar in principle to a conventional ball valve, but with a half ball that makes a “C” shape. This C-shaped ball rotates on two planes of motion with energy from the stem to close and seal against a fixed seat.
Fully Welded Ball Valve
A fully welded valve is designed with a fully welded and forged body to reduce weight and increase strength while eliminating several potential leak points. They are used to connect and shut off the flow of the medium in many different pipeline systems
General Plug Valve
The GENERAL VALVE® is a high-integrity positive shut-off Double-Block-and-Bleed valve designed for custody transfer for the petroleum, oil and gas industries. Introduced in 1941, GENERAL VALVE® Twin Seal plug valves were the first to meet the rigid requirements of double block-and-bleed service.
Discharge Valve/ Pressure Relief Valve
A pressure relief valve (PRV), also known as a safety relief valve, is a crucial safety device designed to prevent damage or accidents by releasing excess pressure in a system when it exceeds a predetermined limit. It opens automatically at a set pressure, allowing fluid to escape until the pressure drops to safe levels, and then closes…
Diaphragm Valve
A diaphragm valve uses a flexible diaphragm to seal and control fluid flow. This design allows for versatile applications, particularly in industries requiring sanitary, high-purity, or abrasive applications. Diaphragm valves are known for their ease of cleaning, minimal dead space, and suitability for various fluids, including those containing solid
Exhaust Valve/Air Evacuation Valve
An air release valve is typically used in water or irrigation schemes to ensure that any entrained air in the water system is automatically released in order to maximize the system performance. Entrained air pockets in pipes can cause excessive head loss and flow reductions if air is not effectively released.
Breathing Valve/Breather Valve
A Breather Valve is a safety feature attached to a nozzle opening on top of an atmospheric storage tank with a fixed roof. The valve is one type of relief valve and its main function is to provide sufficient air to the storage tank when the tank is in an out-breathing condition
Steam Jacket Valve
Designed for any service where absolute control of fluids is required within a specified temperature range. The purpose of a steam jacket is to provide indirect heating to the contents of the vessel by transferring heat from the steam to the vessel walls.
Balancing Valve/ Balance Valve
Balancing valves are throttling devices designed to regulate the fluid flow through hydronic components. In hydronic systems (HVAC systems that use water as a medium to heat and cool areas of the facility), they facilitate the distribution of heated or chilled water to all terminals
Vacuum Valve
A vacuum valve is a device used in vacuum systems to control the flow of gas or isolate areas within the system. They are essential for maintaining the desired pressure levels and ensuring proper operation of vacuum-related processes.
Knife Gate Valve/ Slide Valve
A slide valve is a device specifically designed to manage the flow of substances within a system. It operates by sliding over an opening to either allow or block the material from flowing. The simplicity of its design and functionality make it a preferred choice for many applications.
Vacuum Breaker Valve
A vacuum valve is a device mounted in a supply or exhaust line of a vacuum system. It is usually used to isolate vacuum areas such as process chambers, or to control incoming and outgoing gas volumes. Vacuum valves can be operated manually, pneumatically, electropneumatically, electrically or electromagnetically.
Regulating Valve/ Automatic Valve/ Control Valve
Regulating valves, also known as control valves, are used to adjust and control the flow of fluids or gases in a system. These valves are designed to provide precise control of the amount of flow passing through them.
Oxygen Valve
Oxygen pressure relief valves are pressure-reducing devices used in compressed air gas systems. By opening proportionally to pressure increases, pressure relief valves are used to ensure outlet pressure remains stable when the inlet pressure and outlet flow change.
Sampling Valve
A sampling valve is a specialized valve designed to extract a representative sample from a fluid (gas, liquid, etc.) in a process. These valves are used to collect samples for testing, analysis, or quality control purposes. They’re found in various industries, including food and beverage, pharmaceuticals, and chemical processing.
Bottom Valve
A special purpose bottom valve equipped with a suction strainer. It is often integrated into various pipework systems, tanks and other vessels. It is designed to hold medium pollutions and regulate liquid level in the system.
Steam Trap
A steam trap is a device that removes condensate and non-condensable gases from a steam system while preventing the escape of live steam. It acts as an automatic valve, opening to discharge condensate and air and closing to prevent steam loss